4” flat frame-in kits combined with LED module and integral reflector. This is designed for use in non-insulated ceiling. Insulation material must be kept a minimum of 3” from fixture. Provided in high efficacy LED with dimmable driver and the special optical diffuser allows high lumen transmission and light uniformity.

Mounting Frame

• Galvanized steel construction.
• Housing adjusts for ceilings up to 1 - 1/4” thick.

LED Module & Trim

• Aluminum extruded heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining light output, color and life of solid state components
• Module construction includes LED, heat sink and lens
• Heavy gauge aluminum reflector anodized in clear, haze, gold, champagne and pewter color finish. Reflectors may be provided with black and white milled groove baffle collar.

Junction Box

• Listed for through branch circuit wiring. (Max.8 No 12 AWG 90OC branch circuit conductors. (4 in, 4 out)
• (5)1/2” knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
• Ground wire provided on J-box.